Rear Discharge Unit

Enviroguard is an innovative and environmentally sound disposal method of waste water and concrete slurry. The Enviroguard chute rinse system is easily installed on to all ready mix concrete trucks. It is well built, simple to use and inexpensive to maintain. With environmental standards and regulations steadily tightening operators are no longer permitted to dump dirty water and concrete slurry on to the ground or near fresh water ways, storm water systems or sewers.

• Unit consists of pump, buckets, hoses, and all necessary hardware

• Total weight is 100 lbs

• Driver attaches special bucket to chute hooks and washes down chute

• A screen in the bucket catches coarse aggregate for later disposal

• Slurry water, including sand is pumped from bucket into mixer drum, usually 5 – 8 gallons

• The pump has been specially modified to reduce wear from abrasives

• All contaminates remain in the truck system

UNIT COMPONENTS:

• Diaphragm Pump - 36 Lbs
• Universal Mount Bracket - 26 Lbs
• Fender Mount Bracket w/ Straps - 11 Lbs
• Right or Left Hand Rear Discharge Washout Can - 16 Lbs
• Right or Left Hand London Washout Can - 17 Lbs
• Right or Left Hand Texas Widemouth Washout Can - 18 Lbs

Total System Weight with all Components = 100 Lbs

REFERENCE: 

• Enviroguard Schematic
• Enviroguard Updated Pump Install

This system also comes with (1) of all of the following small parts:

Part #                                                   Description